Journal of Clinical and Diagnostic Research, ISSN - 0973 - 709X

Users Online : 76545

AbstractMaterial and MethodsResultsDiscussionConclusionAcknowledgementReferencesDOI and Others
Article in PDF How to Cite Citation Manager Readers' Comments (0) Audio Visual Article Statistics Link to PUBMED Print this Article Send to a Friend
Advertisers Access Statistics Resources

Dr Mohan Z Mani

"Thank you very much for having published my article in record time.I would like to compliment you and your entire staff for your promptness, courtesy, and willingness to be customer friendly, which is quite unusual.I was given your reference by a colleague in pathology,and was able to directly phone your editorial office for clarifications.I would particularly like to thank the publication managers and the Assistant Editor who were following up my article. I would also like to thank you for adjusting the money I paid initially into payment for my modified article,and refunding the balance.
I wish all success to your journal and look forward to sending you any suitable similar article in future"



Dr Mohan Z Mani,
Professor & Head,
Department of Dermatolgy,
Believers Church Medical College,
Thiruvalla, Kerala
On Sep 2018




Prof. Somashekhar Nimbalkar

"Over the last few years, we have published our research regularly in Journal of Clinical and Diagnostic Research. Having published in more than 20 high impact journals over the last five years including several high impact ones and reviewing articles for even more journals across my fields of interest, we value our published work in JCDR for their high standards in publishing scientific articles. The ease of submission, the rapid reviews in under a month, the high quality of their reviewers and keen attention to the final process of proofs and publication, ensure that there are no mistakes in the final article. We have been asked clarifications on several occasions and have been happy to provide them and it exemplifies the commitment to quality of the team at JCDR."



Prof. Somashekhar Nimbalkar
Head, Department of Pediatrics, Pramukhswami Medical College, Karamsad
Chairman, Research Group, Charutar Arogya Mandal, Karamsad
National Joint Coordinator - Advanced IAP NNF NRP Program
Ex-Member, Governing Body, National Neonatology Forum, New Delhi
Ex-President - National Neonatology Forum Gujarat State Chapter
Department of Pediatrics, Pramukhswami Medical College, Karamsad, Anand, Gujarat.
On Sep 2018




Dr. Kalyani R

"Journal of Clinical and Diagnostic Research is at present a well-known Indian originated scientific journal which started with a humble beginning. I have been associated with this journal since many years. I appreciate the Editor, Dr. Hemant Jain, for his constant effort in bringing up this journal to the present status right from the scratch. The journal is multidisciplinary. It encourages in publishing the scientific articles from postgraduates and also the beginners who start their career. At the same time the journal also caters for the high quality articles from specialty and super-specialty researchers. Hence it provides a platform for the scientist and researchers to publish. The other aspect of it is, the readers get the information regarding the most recent developments in science which can be used for teaching, research, treating patients and to some extent take preventive measures against certain diseases. The journal is contributing immensely to the society at national and international level."



Dr Kalyani R
Professor and Head
Department of Pathology
Sri Devaraj Urs Medical College
Sri Devaraj Urs Academy of Higher Education and Research , Kolar, Karnataka
On Sep 2018




Dr. Saumya Navit

"As a peer-reviewed journal, the Journal of Clinical and Diagnostic Research provides an opportunity to researchers, scientists and budding professionals to explore the developments in the field of medicine and dentistry and their varied specialities, thus extending our view on biological diversities of living species in relation to medicine.
‘Knowledge is treasure of a wise man.’ The free access of this journal provides an immense scope of learning for the both the old and the young in field of medicine and dentistry as well. The multidisciplinary nature of the journal makes it a better platform to absorb all that is being researched and developed. The publication process is systematic and professional. Online submission, publication and peer reviewing makes it a user-friendly journal.
As an experienced dentist and an academician, I proudly recommend this journal to the dental fraternity as a good quality open access platform for rapid communication of their cutting-edge research progress and discovery.
I wish JCDR a great success and I hope that journal will soar higher with the passing time."



Dr Saumya Navit
Professor and Head
Department of Pediatric Dentistry
Saraswati Dental College
Lucknow
On Sep 2018




Dr. Arunava Biswas

"My sincere attachment with JCDR as an author as well as reviewer is a learning experience . Their systematic approach in publication of article in various categories is really praiseworthy.
Their prompt and timely response to review's query and the manner in which they have set the reviewing process helps in extracting the best possible scientific writings for publication.
It's a honour and pride to be a part of the JCDR team. My very best wishes to JCDR and hope it will sparkle up above the sky as a high indexed journal in near future."



Dr. Arunava Biswas
MD, DM (Clinical Pharmacology)
Assistant Professor
Department of Pharmacology
Calcutta National Medical College & Hospital , Kolkata




Dr. C.S. Ramesh Babu
" Journal of Clinical and Diagnostic Research (JCDR) is a multi-specialty medical and dental journal publishing high quality research articles in almost all branches of medicine. The quality of printing of figures and tables is excellent and comparable to any International journal. An added advantage is nominal publication charges and monthly issue of the journal and more chances of an article being accepted for publication. Moreover being a multi-specialty journal an article concerning a particular specialty has a wider reach of readers of other related specialties also. As an author and reviewer for several years I find this Journal most suitable and highly recommend this Journal."
Best regards,
C.S. Ramesh Babu,
Associate Professor of Anatomy,
Muzaffarnagar Medical College,
Muzaffarnagar.
On Aug 2018




Dr. Arundhathi. S
"Journal of Clinical and Diagnostic Research (JCDR) is a reputed peer reviewed journal and is constantly involved in publishing high quality research articles related to medicine. Its been a great pleasure to be associated with this esteemed journal as a reviewer and as an author for a couple of years. The editorial board consists of many dedicated and reputed experts as its members and they are doing an appreciable work in guiding budding researchers. JCDR is doing a commendable job in scientific research by promoting excellent quality research & review articles and case reports & series. The reviewers provide appropriate suggestions that improve the quality of articles. I strongly recommend my fraternity to encourage JCDR by contributing their valuable research work in this widely accepted, user friendly journal. I hope my collaboration with JCDR will continue for a long time".



Dr. Arundhathi. S
MBBS, MD (Pathology),
Sanjay Gandhi institute of trauma and orthopedics,
Bengaluru.
On Aug 2018




Dr. Mamta Gupta,
"It gives me great pleasure to be associated with JCDR, since last 2-3 years. Since then I have authored, co-authored and reviewed about 25 articles in JCDR. I thank JCDR for giving me an opportunity to improve my own skills as an author and a reviewer.
It 's a multispecialty journal, publishing high quality articles. It gives a platform to the authors to publish their research work which can be available for everyone across the globe to read. The best thing about JCDR is that the full articles of all medical specialties are available as pdf/html for reading free of cost or without institutional subscription, which is not there for other journals. For those who have problem in writing manuscript or do statistical work, JCDR comes for their rescue.
The journal has a monthly publication and the articles are published quite fast. In time compared to other journals. The on-line first publication is also a great advantage and facility to review one's own articles before going to print. The response to any query and permission if required, is quite fast; this is quite commendable. I have a very good experience about seeking quick permission for quoting a photograph (Fig.) from a JCDR article for my chapter authored in an E book. I never thought it would be so easy. No hassles.
Reviewing articles is no less a pain staking process and requires in depth perception, knowledge about the topic for review. It requires time and concentration, yet I enjoy doing it. The JCDR website especially for the reviewers is quite user friendly. My suggestions for improving the journal is, more strict review process, so that only high quality articles are published. I find a a good number of articles in Obst. Gynae, hence, a new journal for this specialty titled JCDR-OG can be started. May be a bimonthly or quarterly publication to begin with. Only selected articles should find a place in it.
An yearly reward for the best article authored can also incentivize the authors. Though the process of finding the best article will be not be very easy. I do not know how reviewing process can be improved. If an article is being reviewed by two reviewers, then opinion of one can be communicated to the other or the final opinion of the editor can be communicated to the reviewer if requested for. This will help one’s reviewing skills.
My best wishes to Dr. Hemant Jain and all the editorial staff of JCDR for their untiring efforts to bring out this journal. I strongly recommend medical fraternity to publish their valuable research work in this esteemed journal, JCDR".



Dr. Mamta Gupta
Consultant
(Ex HOD Obs &Gynae, Hindu Rao Hospital and associated NDMC Medical College, Delhi)
Aug 2018




Dr. Rajendra Kumar Ghritlaharey

"I wish to thank Dr. Hemant Jain, Editor-in-Chief Journal of Clinical and Diagnostic Research (JCDR), for asking me to write up few words.
Writing is the representation of language in a textual medium i e; into the words and sentences on paper. Quality medical manuscript writing in particular, demands not only a high-quality research, but also requires accurate and concise communication of findings and conclusions, with adherence to particular journal guidelines. In medical field whether working in teaching, private, or in corporate institution, everyone wants to excel in his / her own field and get recognised by making manuscripts publication.


Authors are the souls of any journal, and deserve much respect. To publish a journal manuscripts are needed from authors. Authors have a great responsibility for producing facts of their work in terms of number and results truthfully and an individual honesty is expected from authors in this regards. Both ways its true "No authors-No manuscripts-No journals" and "No journals–No manuscripts–No authors". Reviewing a manuscript is also a very responsible and important task of any peer-reviewed journal and to be taken seriously. It needs knowledge on the subject, sincerity, honesty and determination. Although the process of reviewing a manuscript is a time consuming task butit is expected to give one's best remarks within the time frame of the journal.
Salient features of the JCDR: It is a biomedical, multidisciplinary (including all medical and dental specialities), e-journal, with wide scope and extensive author support. At the same time, a free text of manuscript is available in HTML and PDF format. There is fast growing authorship and readership with JCDR as this can be judged by the number of articles published in it i e; in Feb 2007 of its first issue, it contained 5 articles only, and now in its recent volume published in April 2011, it contained 67 manuscripts. This e-journal is fulfilling the commitments and objectives sincerely, (as stated by Editor-in-chief in his preface to first edition) i e; to encourage physicians through the internet, especially from the developing countries who witness a spectrum of disease and acquire a wealth of knowledge to publish their experiences to benefit the medical community in patients care. I also feel that many of us have work of substance, newer ideas, adequate clinical materials but poor in medical writing and hesitation to submit the work and need help. JCDR provides authors help in this regards.
Timely publication of journal: Publication of manuscripts and bringing out the issue in time is one of the positive aspects of JCDR and is possible with strong support team in terms of peer reviewers, proof reading, language check, computer operators, etc. This is one of the great reasons for authors to submit their work with JCDR. Another best part of JCDR is "Online first Publications" facilities available for the authors. This facility not only provides the prompt publications of the manuscripts but at the same time also early availability of the manuscripts for the readers.
Indexation and online availability: Indexation transforms the journal in some sense from its local ownership to the worldwide professional community and to the public.JCDR is indexed with Embase & EMbiology, Google Scholar, Index Copernicus, Chemical Abstracts Service, Journal seek Database, Indian Science Abstracts, to name few of them. Manuscriptspublished in JCDR are available on major search engines ie; google, yahoo, msn.
In the era of fast growing newer technologies, and in computer and internet friendly environment the manuscripts preparation, submission, review, revision, etc and all can be done and checked with a click from all corer of the world, at any time. Of course there is always a scope for improvement in every field and none is perfect. To progress, one needs to identify the areas of one's weakness and to strengthen them.
It is well said that "happy beginning is half done" and it fits perfectly with JCDR. It has grown considerably and I feel it has already grown up from its infancy to adolescence, achieving the status of standard online e-journal form Indian continent since its inception in Feb 2007. This had been made possible due to the efforts and the hard work put in it. The way the JCDR is improving with every new volume, with good quality original manuscripts, makes it a quality journal for readers. I must thank and congratulate Dr Hemant Jain, Editor-in-Chief JCDR and his team for their sincere efforts, dedication, and determination for making JCDR a fast growing journal.
Every one of us: authors, reviewers, editors, and publisher are responsible for enhancing the stature of the journal. I wish for a great success for JCDR."



Thanking you
With sincere regards
Dr. Rajendra Kumar Ghritlaharey, M.S., M. Ch., FAIS
Associate Professor,
Department of Paediatric Surgery, Gandhi Medical College & Associated
Kamla Nehru & Hamidia Hospitals Bhopal, Madhya Pradesh 462 001 (India)
E-mail: drrajendrak1@rediffmail.com
On May 11,2011




Dr. Shankar P.R.

"On looking back through my Gmail archives after being requested by the journal to write a short editorial about my experiences of publishing with the Journal of Clinical and Diagnostic Research (JCDR), I came across an e-mail from Dr. Hemant Jain, Editor, in March 2007, which introduced the new electronic journal. The main features of the journal which were outlined in the e-mail were extensive author support, cash rewards, the peer review process, and other salient features of the journal.
Over a span of over four years, we (I and my colleagues) have published around 25 articles in the journal. In this editorial, I plan to briefly discuss my experiences of publishing with JCDR and the strengths of the journal and to finally address the areas for improvement.
My experiences of publishing with JCDR: Overall, my experiences of publishing withJCDR have been positive. The best point about the journal is that it responds to queries from the author. This may seem to be simple and not too much to ask for, but unfortunately, many journals in the subcontinent and from many developing countries do not respond or they respond with a long delay to the queries from the authors 1. The reasons could be many, including lack of optimal secretarial and other support. Another problem with many journals is the slowness of the review process. Editorial processing and peer review can take anywhere between a year to two years with some journals. Also, some journals do not keep the contributors informed about the progress of the review process. Due to the long review process, the articles can lose their relevance and topicality. A major benefit with JCDR is the timeliness and promptness of its response. In Dr Jain's e-mail which was sent to me in 2007, before the introduction of the Pre-publishing system, he had stated that he had received my submission and that he would get back to me within seven days and he did!
Most of the manuscripts are published within 3 to 4 months of their submission if they are found to be suitable after the review process. JCDR is published bimonthly and the accepted articles were usually published in the next issue. Recently, due to the increased volume of the submissions, the review process has become slower and it ?? Section can take from 4 to 6 months for the articles to be reviewed. The journal has an extensive author support system and it has recently introduced a paid expedited review process. The journal also mentions the average time for processing the manuscript under different submission systems - regular submission and expedited review.
Strengths of the journal: The journal has an online first facility in which the accepted manuscripts may be published on the website before being included in a regular issue of the journal. This cuts down the time between their acceptance and the publication. The journal is indexed in many databases, though not in PubMed. The editorial board should now take steps to index the journal in PubMed. The journal has a system of notifying readers through e-mail when a new issue is released. Also, the articles are available in both the HTML and the PDF formats. I especially like the new and colorful page format of the journal. Also, the access statistics of the articles are available. The prepublication and the manuscript tracking system are also helpful for the authors.
Areas for improvement: In certain cases, I felt that the peer review process of the manuscripts was not up to international standards and that it should be strengthened. Also, the number of manuscripts in an issue is high and it may be difficult for readers to go through all of them. The journal can consider tightening of the peer review process and increasing the quality standards for the acceptance of the manuscripts. I faced occasional problems with the online manuscript submission (Pre-publishing) system, which have to be addressed.
Overall, the publishing process with JCDR has been smooth, quick and relatively hassle free and I can recommend other authors to consider the journal as an outlet for their work."



Dr. P. Ravi Shankar
KIST Medical College, P.O. Box 14142, Kathmandu, Nepal.
E-mail: ravi.dr.shankar@gmail.com
On April 2011
Anuradha

Dear team JCDR, I would like to thank you for the very professional and polite service provided by everyone at JCDR. While i have been in the field of writing and editing for sometime, this has been my first attempt in publishing a scientific paper.Thank you for hand-holding me through the process.


Dr. Anuradha
E-mail: anuradha2nittur@gmail.com
On Jan 2020

Important Notice

Reviews
Year : 2022 | Month : June | Volume : 16 | Issue : 6 | Page : CE01 - CE09 Full Version

Potential Determinants of Manual Lifting: Validation of Ergonomic Assessment by Scoping Review Applying Meta-analysis Approach


Published: June 1, 2022 | DOI: https://doi.org/10.7860/JCDR/2022/53143.16422
Kiran Mondal, Deepti Majumdar, Jai Chand Patel, Sugadev Ragumani, Tammanna R Sahrawat

1. Senior Research Fellow, Ergonomics Laboratory, Defence Institute of Physiology and Allied Sciences, New Delhi, India. 2. Scientist E, Ergonomics Laboratory, Defence Institute of Physiology and Allied Sciences, New Delhi, India. 3. Senior Research Fellow, Defence Institute of Physiology and Allied Sciences, New Delhi, India. 4. Scientist F, Defence Institute of Physiology and Allied Sciences, New Delhi, India. 5. Assistant Professor, Centre for Systems Biology and Bioinformatics, UIEAST, Punjab University, Chandigarh, India.

Correspondence Address :
Deepti Majumdar,
Scientist E, Ergonomics Laboratory, Defence Institute of Physiology and Allied Sciences (DIPAS), DRDO, Lucknow Road, Timarpur, New Delhi-110054, India.
E-mail: deepti67@gmail.com

Abstract

Introduction: Despite automation, manual load lifting is unavoidable in occupations like industry, healthcare, defence, etc. Ergonomics studies on manual lifting conducted across the globe explored few aspects of biomechanical and physiological responses. It was hypothesised that, ‘holistic ergonomics approach’ involving simultaneous recording of these responses under single study, would elucidate potential injury causing factors more effectively and results could be validated by applying meta-analysis technique of literature review.

Aim: To identify the potential determinants of manual lifting by applying multivariate statistics to existing data and correlate the results with determinants as per literature review applying meta-analysis.

Materials and Methods: Clustering and principal component analysis tools of factor analysis was applied on the data obtained under the pilot study (n=11) undertaken by same authors previously on manual lifting that assessed 26 dependent parameters simultaneously for load magnitudes (10 kg, 20 kg), lifting heights (floor-knuckle, knuckle-shoulder and floor-shoulder) and lifting frequencies (1 lift/min, 4 lift/min). Further, extensive scoping literature review on determinants of manual load lifting was done applying text mining tool of meta-analysis technique on R software platform using 921 Pubmed abstracts published between 1991 and 2018.

Results: Salient findings of factor analysis corroborated with that of scoping literature review. Accordingly, dependent variable ‘Vertical Ground Reaction Force (VGRF)’ and independent variable ‘vertical height of lift’ changed most significantly during manual lifting, showing significant positive correlations. Newton’s third law of motion states that while bipedal standing/walking/running on floor, two forces (with three vector components) are acting upon a person: the force of gravity (downward force, equivalent to body weight) and the Ground Reaction Force (GRF, an equal upward force exerted by floor). However, while standing still at one place for lifting load, only the largest vector component of GRF, i.e., VGRF acts on the body (=‘body weight’+‘load magnitude’) through the vertical height of lift.

Conclusion: It may be concluded that ‘vertical height of lift’ and VGRF are possible indicators of injury potential of manual lifting. However, studies on larger sample size and meta-analysis of relevant full papers instead of abstracts need to be done in future.

Keywords

Data mining, Factor analysis, Lifting height, Vertical ground reaction force

Despite automation, manual lifting of load is inherent to many occupations across the globe, including manufacturing industries, agriculture sectors, defence sector, health care services, construction workers and porters (1). When undertaken without mechanical support, such tasks may put workers at great risk of injury or health disorder symptoms (2),(3),(4),(5),(6), increasing absenteeism, disability, economy and man hour loss. Load lifting capability of any population is directly related to anthropometric characteristics (7), muscular strength, endurance and flexibility. Lifting heavy load requires muscular strength and when the task is repetitive, muscular endurance is required which needs higher aerobic capacity of the worker. Muscular flexibility is important in protecting the individual against lower back pain and other overuse disabilities or injuries caused by manual lifting of load (8). Thus, ergonomic assessment of Manual Lifting Tasks (MLT) is important for understanding the load lifting capacity of a given population, which varies with anthropometry, health and fitness level of concerned population. Therefore, adopting a holistic approach is required for ergonomically assessing the load lifting capability of Indian population for further customising such activities to minimise overuse injury potential. In addition, it is important to understand whether data on determinants of manual load lifting in Indian population have similarities with data existing globally in literature.

Numerous studies on ergonomic assessment of MLT exist across the globe that involve monitoring one or more dependent variables (kinematics, kinetics, Electromyography (EMG) and physiological parameters) indicating physical demands of these activities. Among independent variables, lifting height and weight are established as important determinants of Manual Material Handling (MMH) activities (9),(10). Past researches indicate that Maximum Acceptable Weight of Lift (MAWL) was influenced by age of lifter, lifting height, magnitude of load lifted manually and rate of lift (9),(11),(12),(13),(14),(15),(16),(17),(18),(19),(20),(21). Although researches on manual lifting have been carried out throughout the globe, they have reported a few aspects of manual load lifting. None of them have applied holistic ergonomics assessment approach, where maximum possible parameters pertaining to MLT could be investigated under a single study to elucidate how these parameters changed with respect to each other. With such approach it would be easier to identify the determinants of manual lifting indicating the physical workload and injury potential of MLT. Once such determinants were identified during human trials for a population, their role as potential marker of physical workload and overuse injuries needed to be validated by extensive review of literature pertaining to those determinants. However, such studies are rare in global literature and was so far not reported for Indian population. Therefore, a pilot study for holistic ergonomics assessment of manual load lifting (n=11) was carried out previously by Mondal K et al. They recorded 26 parameters (kinematics, kinetics, physiology and EMG responses) under a single study under same experimental conditions of lifting load magnitude, frequency and height of lift (22).

Following this, present study was designed to be carried out in two phases. First phase would involve applying multivariate statistics (factor analysis) on the data obtained under previously carried out holistic ergonomics study on MLT. Second phase would involve application of meta-analysis technique to conduct scoping review of literature on the 26 parameters pertaining to MLT that were dealt with in the first phase of the current study. Both scoping reviews and systematic reviews use meta-analyses techniques to provide replicable ways of summarising a group of published studies to address an important research issue. However, these techniques are distinct from each other and one needs to understand what research questions they can, and cannot address. Scoping review technique involves extensive literature search with exploratory or descriptive approach that is designed to map the literature around a particular topic which may comprise of several issues at a time, giving it a broader perspective. The results of scoping reviews may not only help to identify gaps in the existing literature, it may also identify areas where there may be sufficient depth of literature so that a systematic review may be done. Systematic reviews are intended to address a specific question by identifying and summarising all of the available research that has addressed the review question, pertaining to narrowed down issues, e.g., prevalence/incidence questions, aetiology, intervention efficacy, diagnostic test accuracy, etc. The systematic review involves extensive literature search in structured steps with multiple reviewers working in parallel to reduce the potential for bias. For each relevant study identified by the search, a formal extraction of data, including the effect size, and assessment of the risk of bias is performed. However, for both these processes, results from multiple studies are be combined using meta-analysis techniques, providing a summary effect size, and enabling the heterogeneity of effect among studies to be quantified and explored. Such evidence synthesis approaches may provide scientific input to evidence based, decision making and maybe useful for identifying lacunae in the literature to enhance the efficiency of future research in a topic area (23).

Research question in the context of current study pertaining to determinants of manual load lifting as studied by Mondal K et al. (2021) involved 26 dependent and 12 experimental conditions or independent determinants, thus expanding the horizons of investigation to a great extent. Therefore, it was understood that in the current scenario, conducting a scoping review would be more appropriate and the wide array of information would be subjected to meta-analysis and narrowed down to answer the research questions asked. It was hypothesised that the determinants of MLT identified for Indian population (first phase) would corroborate with those determinants reported by past studies carried out elsewhere on similar populations (second phase). Current study, therefore, had two objectives to attain:

• To identify the dependent determinants of MLT which changed significantly for each of independent determinants using multivariate statistics on existing manual load lifting data
• To validate the results obtained under first objective of the present study by reviewing past studies on manual load lifting applying meta-analysis technique.

Material and Methods

Present study used the data already collected under a pilot study conducted by Mondal K et al. (2021) (22). As no human trial was conducted under the current study, no permission from Institution’s Ethics Committee was required.

Experimental Protocol (Mondal K et al., 2021)

Institutional Ethics Committee first approved experimental protocol [Ref. No. IEC/DIPAS/D-1/2 dated 08 December 2015] in accordance to Helsinki protocol (1964). Accordingly, informed consent was signed by each participant. The study involved physically fit and active Indian male urban students (n=11) with mean±SD age, height, weight and maximum oxygen consumption (VO2max) as 24.2±2.23 years, 174.5±3.04 cm, 72.7±8.72 kg, and 38.4±3.96 mL.min-1.kg-1, respectively. Parameters pertaining to realtime kinematics, kinetics, surface electromyography and physiological measurements were collected during manual lifting of loads (10 and 20 kg) through three lifting heights Floor to Knuckle (F-K), Knuckle to Shoulder (K-S) and Floor to Shoulder (F-S) and two lifting frequencies (1 lift.min-1 and 4 lifts.min-1). Total number of 30 trials performed by each volunteer comprised of three trials for 1 lift.min-1 and two trials for 4 lifts.min-1. Five minutes resting pause was given after each trial (Table/Fig 1). Videography for each trial was done and images were extracted at different positions and analysed to get 2D prediction biomechanics (kinematics and kinetics) parameters. For each parameter, “three way repeated measure Analysis of Variance (ANOVA)” was done, followed by Bonferroni post hoc test for the pairwise comparison of main effect within group using Statistical Product and Service Solutions IBM® (SPSS) version 21(M/s IBM Corp., USA). A value of p ≤0.05 was considered to be statistically significant. Few (Table/Fig 2), (Table/Fig 3), (Table/Fig 4), (Table/Fig 5) from Mondal K et al. (2021) are included in the methodology of current paper for better understanding of the parameters used with an overview of salient findings of the previous study that forms a basis for current review. For detailed information the published paper may be referred (22). Respective significance levels of 26 dependent variables studied across different independent variables are given in (Table/Fig 2) (22). Parameters which exhibited pairwise significant responses and their levels of significance are given in (Table/Fig 3), (Table/Fig 4), respectively. Out of 26 dependent variables, 12 variables for lifting weight, all variables for lifting height and five variables for lifting frequencies showed significant changes (p-value ≤0.05; (Table/Fig 3). Further it was observed that only Vertical Ground Reaction Force (VGRF) showed significant variation across all independent variables of weight F(1,10)=78.854, p-value=0.001, height F(1.279,12.794)=44.349, p-value=0.001 and frequency F(1,10)=9.510, p-value=0.01 (Table/Fig 3), (Table/Fig 4), (Table/Fig 5).

Study Protocols for Current Multivariate Analysis and Scoping Review

i) Factor analysis: Principle Component Analysis (PCA) and clustering

Prior to factor analysis, sample adequacy test of Kaiser-Meyer-Olkin (KMO) measure and Bartlett’s test of sphericity were done. The KMO measure of sampling adequacy is a statistic that indicates the proportion of variance in the concerned variables that might be caused by underlying factors. Sample adequacy is a point where facts about the sample are reasonable approximation about the population and the sample size can be said to be adequate. High values of KMO (0.8 to 1.0) indicates that factor analysis may be useful for the concerned data and that the sampling is adequate. If KMO value is less than 0.6, it indicates that sampling is not adequate and remedial actions need to be applied. Bartlett’s test of sphericity compares an observed correlation matrix with identity matrix. It tests homogeneity of variance across the samples and is used to check if there was a certain redundancy between the variables that could be summarised with a few number of factors. Significance level for Bartlett’s test below 0.05 indicates that there is substantial correlation in the data (24),(25).

Factor analysis is a technique to reduce a large number of variables into fewer numbers of factors. This technique extracts maximum common variance from all variables and puts them into a common score. Factor loading is basically the correlation coefficient for the variable and factor, indicating the variance explained by the variable on that particular factor. This technique factorises a massive matrix with more than two components into new dimensions known as eigen vectors which are defined dimensions with specific eigen values that are scalar quantities. These eigen values or ‘characteristic roots’ show a proportion of the variance explained by one particular factor out of the total variance. Thus factor analysis is applied on the multidimensional experimental data for identifying the number of variables. The factor scores or the component scores of all rows and columns are used as indices of all variables and can be subjected to further analysis. This score can be standardised as factor score by multiplying by a common term. Whatever further analysis is done, it is assumed that all variables will behave as factor scores and will move. According to the Kaiser criterion, variable having eigen value greater than one is a factor and if it is less than one, it should not be considered as a factor.

Principle Component Analysis (PCA), most commonly used procedure of factor analysis in research, was performed on same platform to find out unique determinants of manual lifting. Using this method, maximum variance was extracted and put into the first factor. After removing the variance explained by the first factor, it extracted maximum variance for the second factor and this process went on till the last factor. This technique removed dependency or redundancy in the data by dropping those features that contained the same information as given by other attributes so that the derived components were independent of each other. This approach reduced unnecessary features by creating or deriving new dimensions (or also referred to as components) that were linear combinations of original variables. This way, PCA converted a larger number of correlated variables (i.e., breaking down the data) into smaller sets of uncorrelated variables. A principal component of a data set is defined as the direction of the dataset explaining the highest variance, as implied by the eigen value of that component. The prominent features in tabular data matrix used under current study was extracted using PCA that yielded confirmatory identification of main determinants of manual load lifting (26),(27),(28).

Thereafter, the outcome of PCA was subjected to hierarchical clustering of variables for finding out variations in the data using “pheatmap” and “factoextra” library packages in R software. Pheatmap is a function of R package for drawing clustered heatmaps that allows to aggregate the rows using ‘k means’ clustering if number of rows is too big for R package to handle (>1000), as was the case in current study. Factoextra package of R is an effective and user friendly tool to extract and visualise the results of exploratory multivariate data analyses like PCA from various packages. It also identifies the most important parts of the PCA results and highlights those rows/columns with quality representation on the factor map and their contributions to the principal dimensions (29),(30).

ii) Text mining based meta-analysis

Text mining, that uses text data mining tool of meta-analysis is the process of transforming unstructured text into structured formats to identify meaningful patterns, trends and new information by applying advanced analytical techniques. These patterns and trends cannot be discovered by traditional data exploration methods because of the fact that there may be too much data or the inter-relationships of these data may be too complicated. These patterns and trends are communicated or expressed in various understandable forms using data visualisation techniques.

Present review involved gathering and presenting available research evidences related to titles and abstract screening of literature pertaining to manual load lifting using text mining tools. During different steps of carrying out meta-analysis, defined questions in form of research queries were addressed and text data from specific theme studies for the given time period was analysed. Thus, in order to validate the results of multivariate statistics under the current study, meta-analysis technique was successfully applied for reviewing literature of past three decades for identifying determinants manual load lifting. Different steps involved in current review is given below.

a) Data preprocessing and extraction: Data preprocessing in text mining is the process of transforming raw data into an understandable format, checking and improving the quality of data before subjecting it to machine learning algorithms. Therefore, in present context, main steps carried out were information retrieval (raw data collection based on pre defined set of queries and pre processing using subtasks like tokenisation and stemming for reducing sizes of indexing files) and Information Extraction (using subtasks like feature selection for identifying most contributing dimension and feature extraction for reducing dimensions). The raw data of our interest was extracted from the PubMed interface of ‘R package’. The query design matrix (Table/Fig 6) was based on different experimental aspects of MLT with exclusion of articles related to “lifting in sports” and articles matching best with the filter ‘human’ were identified. Using R statistical environment, unified datasets of relevant articles from PubMed source were collected and the metadata was compiled on 18 January 2019. Article indexing was performed with medline ranker. Articles having non significant p-values >0.01 were eliminated at the initial stage and number of articles were further reduced applying box plot on the basis of p-values |log10| obtained from medline ranker. Articles that appeared as outliers above the 4th quartile in the box plot were used for analysis (31). Best matched outlier articles with significant p-value were considered and the articles dated back from 1991 and the publication time period was between the year 1991 and 18 January 2019.

b) Presentation of text data: Multiple Multiple R based functions and pack¬ages were used to sort and subset the metadata. The abstracts as text data were exported in R software using “PubMedWordcloud” library package using get abstracts function (32). Word clouds and bar charts were plotted with top 50 words and top 20 words respectively for all three decades starting from 1991.

Results

i) Cluster analysis outcomes

The study by Mondal K et al. reported that, out of three independent factors of MLT studied, ‘lifting height’ showed most significant responses with dependent factors VGRF, L-trapezius and SF-L (Table/Fig 4). These variables were subjected to clustering under factor analysis technique for identifying significant determinant of MLT using R programming and clustering patterns of individual determinants were analysed (Table/Fig 7). Classification of 12 experimental tasks was done using VGRF values. According to VGRF and SF-L based clustering, ‘floor to knuckle’ and ‘floor to shoulder’ with 20 Kg weight were classified together. Further, VGRF clustered ‘knuckle to shoulder’ with load of ‘20 Kg’ and ‘floor to shoulder’ with load of ‘10 Kg’ for lifting frequencies 1 lift/min and 4 lifts.min-1, respectively. Values of L-Trapezius were inappropriate for classification of experimental tasks. Thus, ranking obtained in descending order was VGRF>SF-L>L-Trapezius, indicating VGRF as most important determinant of MLT.

ii) Principal component analysis (factor analysis) outcomes

Responses of VGRF, L-Trapezius and SF-L during MLT (22) were subjected to principal component analysis. Sample adequacy measures were: KMO=0.76, χ2=831.85, df=66, p-value <0.01. The KMO value >0.68 indicated factor analysis adequacy of current data. Highest variation in the PC1 axis (88.1%) was observed for VGRF as compared to SF-L and L-Trapezius in the PC2 axis (4.3%) (Table/Fig 8). This indicated VGRF as most important determinant of MLT and indicator of injury potential of such tasks.

iii) Meta-analysis outcomes

Number of articles fetched by R programming from PMIDs with each query and total number of unique articles obtained after redundancy elimination are reported in (Table/Fig 6). A total number of unique 921 PMIDs obtained was reduced to 109 articles by medline ranker which were statistically significant at the level of p-value <0.01. Out of these, 44 unique articles were outliers with most significant p and were selected for meta-analysis. Word cloud analysis showed 50 key words which ranked top in terms of frequencies in all three decades (1991-2000; 2001-2010 and 2011-2018). Most frequently used words in first decade (1991-2000) were “vertical” and “force”. Keywords “vertical”, “ground”, “reaction” and “force” were most frequently used words in the decades 2001-2010 and 2011-2018; also appearing among the top 20 frequently used key words in all the decades (Table/Fig 9).

Discussion

Different studies in the past have discussed different aspects of Manual Lifting Tasks (MLT). Biomechanical approaches of assessing effects of MLT on back and spinal kinematics (14), full body kinematics (21), spinal kinetics and trunk muscular forces (33), lumber loading (34), segmental kinematics and ground reaction force (35), trunk and hip kinematics (36) and load acceleration and angular velocity (37) were observed. Also, frequently, electromyography (EMG) responses of different muscle groups (11),(16),(38),(39) and physiological determinants (13),(39),(40),(41),(42) have been used to understand different aspects of MLT. Jorgensen MJ et al. (1999) used psychophysical technique to identify biomechanical and physiological variables associated with the decision of participants ‘to change the weight of lift’ while determining Maximum Acceptable Weight of Lift (MAWL). Therefore, trunk positions, velocities and accelerations were measured during lifting and spinal loading were computed in terms of moments and forces in three dimensions using an EMG assisted biomechanical model (38). Many methods for evaluation of MLT exist in literature which assess such activities and may suggest how to ergonomically maintain the task demand within safe limits of the person’s capability (43). However, none of these studies used ‘holistic ergonomics assessment approach’ that would include simultaneously all possible determinants of MLT in a single study and therefore, could not point out one or more dependent determinant of MLT that would maximally help to assess the injury risk potential of the given lifting task. Over the years, practice has gradually evolved into ‘holistic ergonomics’ that fuses physiological, biomechanical and other related aspects of today’s workplace together, thus expanding the horizon of authentic knowledge across wide range of ergonomics issues (44). The study by Mondal K et al. (2021) applied this holistic ergonomics approach and reported 26 parameters related to manual load lifting under a single study (22).

Primary objective of current study involved advanced statistical treatment of this data obtained by Mondal K et al. (2021) in order to determine most important dependent and independent determinant of manual lifting that had highest injury potential in terms of physical workload. Once dependent and independent determinants were identified using clustering and principal component analysis techniques, the second objective of the current study was to validate the findings of the first objectives with the data available in literature. Now the questions that arose were, what type of review systematic or scoping, was required under such condition and how to go about it. Systematic reviews are resource intensive and more useful in replying queries pertaining to most applicable/suitable clinical practices or treatments in health care issues whereas, Scoping reviews are exploratory and typically address a broader question. They have a great utility in synthesising research evidence and are often used to categorise literature in terms of nature, features and volume.

According to Grant MJ and Booth A (2009) ‘scoping reviews’ are preliminary assessment of potential size and scope of available literature and aims to identify nature and extent of research evidence, sometimes including ongoing research and is used to highlight gaps or lacunae in the literature (44). Having wider horizon, scoping reviews may be used to decide whether it would be useful to conduct a systematic review (45). For conducting a scoping review, one needs to consider all aspects relating to a ‘research topic or issue’, rather than ‘questions’ based studies as done under systematic reviews. The process of searching the literature for relevant studies is same for both scoping and systematic reviews Thus, in the context of current study, conducting a scoping review to find out more about the body of evidence in area of ‘manual lifting’ seemed to be a better idea, aiming to maximise the sensitivity of the search for identifying relevant literature. Carrying out current review was important due to the fact that decisions about the utility of an intervention or the validity of a hypothesis cannot be based on the results of a single study as results typically vary from one study to the next. Rather, a mechanism was needed to synthesise data across studies. Narrative reviews on any subject are largely subjective and becomes difficult when there are more than a few studies involved. Meta-analysis, by contrast, applies objective formulae (much as one would apply statistics to data within a single study), and can be used with any number of studies. Thus this unique approach of the current study may provide insight to resolving such issues and may help in identifying and bridging the gap in literature (23).

Meta-analysis refers to the statistical analysis of the meta data collected from independent primary studies focused on the research topic, aiming to generate a quantitative estimate of the studied phenomenon. Goals of meta-analysis include assessing the strength of evidence available on a particular research question, determining whether an effect exists and if it exists, whether the effect is positive or negative and finally obtaining a single summary estimate of the effect. Current review was designed to collect information from huge number publications for identifying effective determinants of manual lifting. Meta-analysis was applied to collect the data produced by available research studies (tabular, text and photos) which could then be combined, quantified and analysed to obtain new insights. ‘Text mining’ or text data mining’ tool of meta-analysis carries out the process of discovering information and structure from unstructured data, such as ‘texts’. meta-analysis can be used to identify the common effect when the treatment effect (or effect size) is consistent from one study to the next. When the effect varies from one study to the next, meta-analysis may be used to identify the reason for the variation (45),(46).

Novel aspect of the current study lies in the treatment of the responses of dependent variables from Mondal K et al. (2021) with factor analysis technique and applying meta-analysis approaches on literature available to identify potential injury determinant. The fact that multivariate statistical treatment results corroborated with meta-analysis outcomes brings out a point of convergence for various doctrines/opinions for understanding physical workload and injury potential of MLT (22).

Previously, Pinder ADJ and Boocock MJ (2014) considered meta-analysis to find out manual acceptable weight of lift from the frequency of lift (20). Zadpoor AA and Nikooyan AA, (2012) used meta-analysis to find out the effects of lower extremity muscular fatigue on ground reaction forces (46). Final outcomes of the meta-analysis of relevant literature is discussed below in terms of lifting height and VGRF:

Lifting height: An independent determinant of MLT

Manual lifting of load is one of the most common activities and form integral part of many occupations. Therefore, ergonomic assessment of manual lifting undertaken for different occupation is important for designing concerned operations (47). Evaluation of MLT from the viewpoint of human safety dates back to early 1960s (42) and is continuing (19). Meanwhile researches on this issue continued to understand different responses of MLT, viz., prediction and real time biomechanics, physiology, electromyography and psychophysiology (1),(33),(40),(48),(49),(50), considering a few variables at a time. Current study reported that all 26 dependent variables showed overall significant effect (Table/Fig 2), (Table/Fig 3) with ‘lifting height’ variations. Thus, it can be stated that ‘lifting height’ had the ability to significantly affect the dependent variables and could be considered as a potential independent indicator of physical workload involved for assessment of MLT. Identifying such variables may help future researchers to categorise MLT according to the severity of injuries that could be caused by prolonged carrying out of such tasks.

VGRF: Dependent determinant of MLT

The 26 dependent determinants of MLT evaluated in Mondal K et al. (2021), including prediction and real time biomechanics, electromyography and physiological parameters, are listed in (Table/Fig 2) and (Table/Fig 3). The meta-analysis on literature review conducted under current study indicated that these were the determinants of MLT reported by past studies also (19),(50),(51),(52). However, as none of the studies reported all 26 parameters, those past studies could not holistically determine which variable had highest injury potential in terms of physical workload. According to statistical analysis of the variables by Mondal K et al. (2021), out of 26 variables reported, only three variables for ‘height of lift’, 12 variables for ‘weight of lift’ and five variables for ‘frequency of lift’ showed significant variations between/within group independent variables (Table/Fig 3), (Table/Fig 5). Fineberg DB et al., (2013) established that while using powered exoskeleton for weight lifting and carrying tasks, participants with varying weight, gait speed, and level of assist could be evaluated for the magnitudes of loading and gait mechanics by estimating the VGRF profile (50). Similarly, results of the current study also indicates that VGRF could be the single most important variable that showed significant variations across all conditions of MLT (Table/Fig 3), (Table/Fig 5) and could be used to interpret the occupational risk of various MLT.

The U.S. Department of Health and Human services published a report in 1981, which gave in detail the work practice guidelines for manual lifting based on the epidemiological, biomechanical, physiological and psychological approaches. This report indicated that spinal forces played key role in interpreting the injury risk of MLT (40). Chaffin DB and his colleagues frequently focused on 2D biomechanics prediction approaches, especially for assessing spinal force during manual lifting (47),(48),(49),(51). Along with VGRF, which showed significant variations across all the experimental independent variables in current study, L-Trapazius and SF-L were statistically significant across all the three lifting height conditions. Newton’s third law of motion states that while bipedal standing/walking/running on floor, two forces (with three vector components) are acting upon a person: the force of gravity (downward force, equivalent to body weight) and the Ground Reaction Force (GRF, an equal upward force exerted by floor). However, while standing still at one place for lifting load, only the largest vector component of GRF (Z-axis), i.e., VGRF acts on the body (=‘body weight’+‘load magnitude’) through the vertical height of lift. The trapezius muscle elevates, depresses, and retracts the scapula or the shoulder and plays vital role in preventing injury in overhead lifting of load. Shear forces associated with lifting may cause injury as they are unaligned forces generated by external force (load being lifted) that push one part of a body in one direction and another part of the body in the opposite direction (22).

Therefore, the present study considered these three variables (VGRF, L-Trapezius and SF-L, (Table/Fig 5) for PCA to identify which dependent variable was most frequently influenced by all the independent variables of MLT. Pheatmap showed that VGRF was the variable causing variations in the data across volunteers. Responses of VGRF to lifting height F-S was found to be dependent on lifting weights and frequencies as F-S did not make any cluster with either lifting weights or frequencies used in current study. Corroborating with the results of Mondal K et al. (2021), individual plot (Table/Fig 8) obtained from PCA indicated that VGRF was the variable that was maximally affected by MLT.

Significant correlation of VGRF with MLT

Pinder ADJ and Boocock MG (2014) considered text mining approach to predict the ‘maximum acceptable weight of lift’ using ‘frequency of lift’ as the independent variable (20). Similarly, in this current paper, an attempt has been made to identify the significant dependent variables of MLT as reported by previous studies applying meta-analysis. Findings of meta-analysis conducted in present study corroborated with the findings of the literature review by Zadpoor AA and Nikooyan AA (2012) that used meta-analysis approach to find out effects of GRF on lower extremity muscular fatigue (46). This review article stated that the impact of ground on human body during different physical activities provided the pathway in which musculoskeletal system got loaded. The GRF, especially the VGRF (vertical component), is the measure of musculoskeletal system loading at the contact with ground and may be 2-11 times the body weight of an individual. It was concluded that peak GRF and muscle loading were directly related to muscle fatigue. Under such conditions of elevated muscle fatigue, body’s inherent capabilities to manage the impact by responses of lower body kinematics (53) got compromised which, eventually, increases the injury risks (49). On similar lines, present study considered text mining approach which fetched 921 articles after redundancy elimination (Table/Fig 6) while every possible aspect of occupational manual lifting other than ‘sports activities’ were considered. A search criterion of ‘human’ was applied. 44 outlier articles were selected for further text analysis on the basis of ‘p’ values through Medline ranker. Significant articles were found between 1990 and 2018 and were categorised in three groups as per the decade of publication (1991-2000, 2001-2010 and 2011-2018). It was observed that the word ‘force’ was the most frequently used word and the words like “vertical”, ‘ground’ and ‘force’ were within top 50 words (Table/Fig 9): A1 and A2 in the decade 1991-2000. The observations for decade 2001-2010 indicated that the word ‘force’ was found to be within top 5 words and the words in combinations out of “vertical”, ‘ground’, ‘reaction’ and ‘force’ were found to be within top 50 words (Table/Fig 9): B1 and B2. Interestingly, the words “vertical”, ‘ground’, ‘reaction’ and ‘force’ were found to have appeared within top 10 words in current decade (2011-2018); [Table/Fig 9]: C1 and C2. It has also been observed that frequency of occurrence of the words “vertical”, ‘ground’, ‘reaction’ and ‘force’ were almost closer and ranked within top 10 words used in current decade (Table/Fig 10). These observations indicated that VGRF appeared in recent decades most frequently in research articles reporting manual lifting. Past researches on the topic, as presented in literature review using meta-analysis, also supported the fact that VGRF was a very important determinant for assessing physically strenuous tasks (16),(19),(36), (49),(52). The salient findings of the study can be extrapolated for understanding the injury risk potential of MLT carried out by similar population elsewhere, both within and outside the country.

Limitation(s)

The limitation of the present study is that the meta-analysis literature survey was conducted only on abstracts from PubMed. As number of articles pertaining to MLT in last three decades were huge and extensive meta-analysis pertaining to full length articles was beyond the scope of the current review, only abstracts were considered. Salient findings of the review can be effectively extrapolated for understanding the injury risk potential of MLT carried out by similar population elsewhere, both within and outside the country.

Conclusion

The datasets of 12 independent variables (varying conditions of lifting weight, height and frequency) and 26 dependent parameters of MLT were analysed by multivariate statistical analysis technique using principle component analysis and clustering. The analysis singled out ‘lifting height’ and VGRF as most significant independent and dependent determinants of MLT, respectively. The meta-analysis approach validated the statistical analysis results. Thus, it may be suggested that ‘lifting height’ and VGRF could be important determinants to assess manual load lifting related tasks. However, for establishing lifting height and VGRF as the indicator for assessing injury risk potential of MLT on different population, ‘holistic ergonomics’ assessment on larger sample size and meta-analysis of relevant full papers instead of abstracts needs to be done in future.

Acknowledgement

Authors are grateful to Director, Defence Institute of Physiology and Allied Sciences, Defence Research and Development Organisation (DRDO), M/o Defence, GOI for constant support and guidance during the study. Authors also extend their heartfelt gratitude to the participants and all others who might be directly or indirectly associated with study and helped to attain study objectives in stipulated time.

References

1.
Gallagher S, Pollard J, Porter WL. Electromyography of the thigh muscles during lifting tasks in kneeling and squatting postures. Ergonomics. 2011;54(1):91-102. [crossref] [PubMed]
2.
Chaffin DB, Herrin GD, Keyserling WM, Garg A. A method for evaluating the biomechanical stresses resulting from manual materials handling jobs. Am Ind Hyg Assoc J. 1977;38(12):662-75. [crossref] [PubMed]
3.
Karwowski W, Yates JW. Reliability of the psychophysical approach to manual lifting of liquids by females. Ergonomics. 1986;29(2):237-48. [crossref] [PubMed]
4.
Majumdar D, Purkayastha SS, Majumdar D, Kumar R. Ergonomics evaluation of Manual Material Handling Operation in the Indian Army. Delhi (India): Defence Research and Development Organisation; 1996. Report No. DIPAS 22/1996.
5.
Kothiyal K, Yuen TW. Muscle strain and perceived exertion in patient handling with and without a transferring aid. Occupational Ergonomics. 2004;4(3):185-97. [crossref]
6.
Cecchini M, Colantoni A, Monarca D, Longo L, Riccioni S. Reducing the Risk from Manual Handling of Loads in Agriculture: Proposal and Assessment of Easily Achievable Preventive Measures. Chemical Engineering Transactions. 2017;58:85-90.
7.
Gross MT, Dailey ES, Dalton MD, Lee AK, McKiernan TL, Vernon WL, et al. Relationship between Lifting Capacity and Anthropometric Measures. J Orthop Sports Phys Ther. 2000;30(5):237-47; discussion 258-61. [crossref] [PubMed]
8.
Sharkey BJ. Fitness and Work Capacity, 2nd Edition, Technology & Development Program, Department of Agriculture and Forest Service, USA, 2017;9751-2814-MTDC.
9.
Hoozemans MJ, Kingma I, de Vries WH, Van Dieen JH. Effect of lifting height and load mass on low back loading. Ergonomics. 2008;51(7):1053-63. [crossref] [PubMed]
10.
Binh PTN, Yazdani A, Carlan N, Wells R. Lifting height as the dominant risk factor for low-back pain and loading during manual materials handling: A scoping review. Journal of IISE Transactions on Occupational Ergonomics and Human Factors. 2017;5(3,4):158-71. [crossref]
11.
Girish N, Rauf I, Vivek K. Influence of age on lifting capacity among manual materials handlers. Work. 2018;60(1):163-68. [crossref] [PubMed]
12.
Abadi ASS, Mazlomi A, Saraji GN, Zeraati H, Hadian MR, Jafari AH. Effects of box size, frequency of lifting, and height of lift on maximum acceptable weight of lift and heart rate for male university students in Iran. Electron Physician. 2015;7(6):1365-71.
13.
Harari Y, Riemer R, Bechar A. Factors determining workers’ pace while conducting continuous sequential lifting, carrying, and lowering tasks. Appl Ergon. 2018;67:61-70. [crossref] [PubMed]
14.
West N, Snodgrass SJ, James C. The effect of load on biomechanics of the back and upper limb in a bench to shoulder lift during the WorkHab Functional Capacity Evaluation. Work. 2018;59(2):201-10. [crossref] [PubMed]
15.
Corbeil P, Plamondon A, Handrigan G, Vallée-Marcotte J, Laurendeau S, Have JT, et al. Biomechanical analysis of manual material handling movement in healthy weight and obese workers. Appl. Ergonomics. 2019;74:124-33. [crossref] [PubMed]
16.
Widia M, Md Dawal SZ, Yusoff N. Maximum acceptable frequency of lift for combined manual material handling task in Malaysia. PLoS ONE. 2019;14(5):e0216918. [crossref] [PubMed]
17.
Abadi SSA, Mazloumi A, Saraji NG, Zeraati H, Hadian MR, Jafari AH. Determining Changes in Electromyography Indices when Measuring Maximum Acceptable Weight of Lift in Iranian Male Students. J Biomed Phys Eng. 2018;8(1):73-86. [crossref] [PubMed]
18.
Afshari D, Latifi SM, Kord S, Nourollahi-Darabad M. Assessment of low back disorders risk based on allowable weight limits for manual lifting in Iran. Ind Health. 2018;56(4):327-35. [crossref] [PubMed]
19.
Banks JJ, Caldwell GE. Are psychophysically chosen lifting loads based on joint kinetics? Appl Ergon. 2019;74:17-23. [crossref] [PubMed]
20.
Pinder ADJ, Boocock MG. Prediction of the maximum acceptable weight of lift from the frequency of lift. International Journal of Industrial Ergonomics. 2014;44(2):225-37. [PubMed]
21.
Faber GS, Koopman AS, Kingma I, Chang CC, Dennerlein JT, van Dieen JH. Continuous ambulatory hand force monitoring during manual materials handling using instrumented force shoes and an inertial motion capture suit. J Biomech. 2018;70:235-41. [crossref] [PubMed]
22.
Mondal K, Majumdar D, Pal M, Sahrawat TR. Assessment of Manual Lifting Tasks in Terms of Biomechanical and Metabolic Responses in Young Indian Adults: A Pilot Study. Op Acc J Biogeneric Sciences & Researchess. 2021;9(1):01-13. Doi: 10.46718/JBGSR.2021.09.000212.
23.
Sargeant JM, O’Connor AM. Scoping reviews, systematic reviews, and meta-analysis: Applications in veterinary medicine. Front Vet Sci. 2020;7:11. Doi: 10.3389/fvets.2020/00011). [crossref] [PubMed]
24.
Cerny BA, Kaiser HF. A study of a measure of sampling adequacy for factor-analytic correlation matrices. Multivariate Behav Res. 1977;12(1):43-47. [crossref] [PubMed]
25.
Bacaksiz FE, Seren AKH, Tuna R. Adaptation and validation of the job crafting behaviors of nurses scale in turkish. International Journal of Caring Sciences. 2018;11(1):512-22.
26.
Pearson K. On lines and planes of closest fit to systems of points in space. The London, Edinburgh and Dublin Philosophical Magazine and Journal of Science. 2010;2(11):559-72. [crossref]
27.
Izenman AJ. Modern Multivariate Statistical Techniques: Regression, Classification, and Manifold Learning. 2008; Springer, New York. [crossref]
28.
Jolliffe I. Principal component analysis. Wiley Stats Ref: Statistics Reference Online, 2014. [crossref]
29.
Kassambara A, Mundt F. Factoextra: Extract and Visualize the Results of Multivariate Data Analyses (R package); 2017.
30.
Kolde R. Pheatmap: Pretty Heatmaps; 2019. R package version 1.0.12.
31.
Patel JC, Khurana P, Sharma YK, Kumar B, Ragumani S. Chronic lifestyle diseases display seasonal sensitive comorbid trend in human population evidence from Google Trends. PloS ONE. 2018;13(12):e0207359. [crossref] [PubMed]
32.
Fan FY. PubMedWordcloud: ‘Pubmed’ Word Clouds; 2017. R package version 0.3.5.
33.
Kim HK, Zhang Y. Estimation of lumbar spinal loading and trunk muscle forces during asymmetric lifting tasks: Application of whole-body musculoskeletal modeling in OpenSim. Ergonomics. 2017;60(4):563-76. [crossref] [PubMed]
34.
Middleton KJ, Carstairs GL, Ham DJ. Lift performance and lumbar loading in standing and seated lifts. Ergonomics. 2016;59(9):1242-50. [crossref] [PubMed]
35.
Shojaei I, Vazirian M, Croft E, Nussbaum MA, Bazrgari B. Age related differences in mechanical demands imposed on the lower back by manual material handling tasks. J Biomech. 201611;49(6):896-903. [crossref] [PubMed]
36.
Lenton G, Aisbett B, Neesham-Smith D, Carvajal A, Netto K. The effects of military body armour on trunk and hip kinematics during performance of manual handling tasks. Ergonomics. 2016;59(6):806-12. [crossref] [PubMed]
37.
Tammana A, McKay C, Cain SM, Davidson SP, Vitali RV, Ojeda L, et al. Load-embedded inertial measurement unit reveals lifting performance. Appl Ergon. 2018;70:68-76. [crossref] [PubMed]
38.
Jorgensen MJ, Davis KG, Kirking BC, Lewis KE, Marras WS. Significance of biomechanical and physiological variables during the determination of maximum acceptable weight of lift. Ergonomics. 1999;42(9):1216-32. [crossref] [PubMed]
39.
Theurel J, Desbrosses K, Roux T, Savescu A. Physiological consequences of using an upper limb exoskeleton during manual handling tasks. Appl Ergon. 2018;67:211-17. [crossref] [PubMed]
40.
Donald WB. Work practices guide for manual lifting. U.S. Depart. of Health & Human Services. Pub. Health Service. Centers for Disease Control 1981. NIOSH Tech Rep. 81-122 p.
41.
Samanta A, Chatterjee BB. A physiological study of manual lifting of loads in Indians. Ergonomics. 1981;24(7):557-64. [crossref] [PubMed]
42.
Snook SH, Ciriello VM. The design of manual handling tasks: Revised tables of maximum acceptable weights and forces. Ergonomics. 1991;34(9):1197-213. [crossref] [PubMed]
43.
Lee KS, Jung MC. Ergonomic evaluation of biomechanical hand function. Safety and Health at Work. 2015;6(1):09-17. [crossref] [PubMed]
44.
Grant MJ, Booth A. A typology of reviews: An analysis of 14 review types and associated methodologies. Health Info Libr J. 2009;26(2):91-108. [crossref] [PubMed]
45.
Shelby LB, Vaske JJ. Understanding meta-analysis: A review of the methodological literature. Leisure Sciences. 2008;30(2):96-110. online; Doi: 10.1080/01490400701881366. [crossref]
46.
Zadpoor AA, Nikooyan AA. The effects of lower extremity muscle fatigue on the vertical ground reaction force: A meta-analysis. Proceedings of the Institution of Mechanical Engineers. Proc Inst Mech Eng H. 2012;226(8):579-88. [crossref] [PubMed]
47.
Anderson CK, Chaffin DB. A biomechanical evaluation of five lifting techniques. Appl Ergon. 1986;17(1):02-08. [crossref]
48.
Chaffin DB. A computerized biomechanical model- development of and use in studying gross body actions. J Biomech. 1969;2(4):429-41. [crossref]
49.
Chaffin DB, Baker WH. A Biomechanical Model for Analysis of Symmetric Sagittal Plane Lifting. AIIE Transactions. 2007;2(1):16-27. [crossref]
50.
Fineberg DB, Asselin P, Harel NY, Agranova-Breyter I, Kornfeld SD, Bauman WA, et al. Vertical ground reaction force-based analysis of powered exoskeleton-assisted walking in persons with motor-complete paraplegia. J Spinal Cord Med. 2013;36(4):313-21. [crossref] [PubMed]
52.
Garg A, Chaffin DB, Freivalds A. Biomechanical Stresses from Manual Load Lifting: A Static vs Dynamic Evaluation. AIIE Transactions. 2007;14(4):272-81. [crossref]
52.
Zehr JD, Carnegie DR, Welsh TN, Beach TAC. A comparative analysis of lumbar spine mechanics during barbell- and crate-lifting: Implications for occupational lifting task assessments. Int J Occup Saf Ergon. 2020;26(1):01-08. [crossref] [PubMed]
53.
Majumdar D, Pal MS, Majumdar D. Effects of military load carriage on kinematics of gait. Ergonomics. 2010;53(6):782-91. [crossref] [PubMed]

DOI and Others

DOI: 10.7860/JCDR/2022/53143.16422

Date of Submission: Nov 03, 2021
Date of Peer Review: Jan 03, 2022
Date of Acceptance: May 03, 2022
Date of Publishing: Jun 01, 2022

AUTHOR DECLARATION:
• Financial or Other Competing Interests: None
• Was Ethics Committee Approval obtained for this study? No
• Was informed consent obtained from the subjects involved in the study? NA
• For any images presented appropriate consent has been obtained from the subjects. NA

PLAGIARISM CHECKING METHODS:
• Plagiarism X-checker: Nov 08, 2021
• Manual Googling: Nov 28, 2021
• iThenticate Software: Feb 16, 2022 (6%)

ETYMOLOGY: Author Origin

JCDR is now Monthly and more widely Indexed .
  • Emerging Sources Citation Index (Web of Science, thomsonreuters)
  • Index Copernicus ICV 2017: 134.54
  • Academic Search Complete Database
  • Directory of Open Access Journals (DOAJ)
  • Embase
  • EBSCOhost
  • Google Scholar
  • HINARI Access to Research in Health Programme
  • Indian Science Abstracts (ISA)
  • Journal seek Database
  • Google
  • Popline (reproductive health literature)
  • www.omnimedicalsearch.com