Full Mouth Rehabilitation of a Patient with Amelogenesis Imperfecta using Twin Stage Procedure
Correspondence Address :
Vineet Sharma,
Subhash Nagar, Jaipur, Rajasthan, India.
E-mail: vineetalwar007@gmail.com
Disclusion, Hobo and takayama, Occlusal rehabilitation
A 26-year-old male patient came to the Department of Prosthodontics with the chief complaint of compromised appearance for 10-12 years with generalised sensitivity to hot and cold, and difficulty in chewing for two years. There was no significant medical history. Extraoral examination revealed no facial asymmetry and muscle tenderness. The mandibular movements were also within normal limits. On intraoral examination, enamel was thin and all the teeth were smaller than normal. There was generalised spacing between anterior teeth, generalised attrition, yellow to brownish discoloration and dental caries in 47 and 85 (Table/Fig 1),(Table/Fig 2). Radiographic examination revealed thin radiopaque layer of enamel with normal radiodensity (Table/Fig 2). The younger sister of the patient also exhibited similar characteristics that indicate a family history.
Based on family history and clinical and radiographic findings, the patient was diagnosed as a case of Amelogenesis Imperfecta (AI) hypoplastic type (1). A freeway space of 6 mm was evaluated. Based on all the clinical findings and freeway space evaluation, it was decided to reconstruct the dentition at 3 mm raised vertical dimension of occlusion. The possible treatment options were full mouth restorations using Hobo Twin Stage Technique or Pankey-Mann Schuyler Technique (2). Finally it was chosen to rehabilitate the patient with full mouth Porcelain Fused Metal (PFM) crown restorations using Hobo twin stage procedure due to single-step tooth preparation, pre-set values, no condylar and lateral records, and multiple visits (3).
After clinical crown lengthening (Table/Fig 1), diagnostic impressions were made in the irreversible hydrocolloid impression material (Zelgan 2002 Alginate; Dentsply) to obtain diagnostic casts. The portrait view and photographs were recorded (Table/Fig 3), face bow record was made and transferred to the semi-adjustable articulator (Hanauâ„¢ Wide-Vue, Whip Mix) (Table/Fig 4). A Centric record was obtained (Table/Fig 5) and mandibular cast along with centric record was mounted to the articulator. An occlusal splint (NMD Splint Plus; NMD Nexus Medodent) was fabricated at the 3 mm raised vertical dimension and the patient was kept in an observation period of 6 weeks to evaluate the adaptation to the altered Vertical Dimension of Occlusion (VDO) (Table/Fig 6). A diagnostic wax-up was done thereafter and the putty index (Photosil; DPI) was made (Table/Fig 7),(Table/Fig 8). All teeth were prepared in a single appointment with minimal occlusal reduction (Table/Fig 9). Full arch impressions of prepared teeth were made using addition silicon elastomeric impression material (Photosil; DPI) (Table/Fig 10). Chairside provisional crowns were fabricated using the putty index of the diagnostic wax-up. A maximum intercuspation in centric relation, as well as posterior disclusion in protrusive guidance, was established (Table/Fig 11)-(13).
The working casts were mounted on semi-adjustable articulator using facebow. To transfer the VDO and centric relation, provisional crowns were removed from left posterior regions, while the provisional crowns from right and anterior regions served as a stop. An interocclusal record material (Aluwax; Aluwax Dental Products Co.) was placed between the left maxillary and mandibular prepared teeth. Similarly, the provisional crowns were removed from right maxillary and mandibular region while they were seated in left and anterior regions. Interocclusal record was placed between the right maxillary and mandibular prepared teeth. A similar procedure was carried out in the anterior region as well. Using these three segmental interocclusal records, the mandibular cast was mounted (Table/Fig 14),(Table/Fig 15). The provisional crowns were then luted with non eugenol temporary cement (NETC; Meta Biomed).
The wax patterns were fabricated and casted, and metal copings were tried in (Table/Fig 16). In stage 1, the anterior segment was removed from the cast, condylar and incisal guidance on the articulator were set to Hobo’s condition 1 for providing an effective cuspal angulation of 25° (3). Condition 1 settings for articulator included Sagittal condylar guidance at 25°, Bennett angle at 15°, Sagittal incisal guidance at 25° and Lateral incisal guidance at 10°. All teeth excluding anterior were built-up in porcelain and balanced in protrusive as well as lateral excursions. In stage 2, the anterior segment of the cast was reassembled and condylar guidance & incisal guidance were set again (Condition 2) (Table/Fig 17). Condition 2 settings for articulator included Sagittal condylar guidance at 40°, Bennett angle at 15°, Sagittal incisal guidance at 45°and Lateral incisal guidance at 20°.
The anterior porcelain build-up was completed and anterior guidance was provided to generate a standard amount of disclusion in posterior teeth (Table/Fig 18)-(Table/Fig 20). The average values for posterior disclusion are 1.1 mm, 0.5 mm and 1.0 mm on protrusive movement, working side, and non working side during lateral movement respectively (3). PFM crowns were cemented with polycarboxylate cement (Table/Fig 21)-(Table/Fig 26). Oral hygiene instructions were given and follow-up was carried out at an interval of six weeks. The follow-up examination of the patient revealed a healthy and comfortable stomatognathic system. A clear change was noticed by comparative evaluation of pre operative, provisional restoration and final restoration profile photographs of the patient (Table/Fig 27). The patient was satisfied with the aesthetics and became more confident to engage in social activities.
Amelogenesis Imperfecta (AI) is an inherited group of odontological disorders which have the effect of altering the formation of enamel and is often associated with loss of the normal occlusal plane, loss of VDO, compromised functions and aesthetics (1). The patient, in this case, had a reduced VDO and a 6 mm freeway space, so it was decided to increase the VDO by 3 mm. Full mouth rehabilitation involves the procedures necessary to produce a healthy, aesthetic, well-functioning masticatory system. Healthy Temporomandibular Joint (TMJ), harmonious anterior guidance and non interfering posteriors are three most important requirements (4). A diagnostic wax-up is always recommended before treatment to determine appearance, remove occlusal interferences and predict tooth preparation needed (5). Anterior guidance plays a crucial role in full mouth rehabilitation following centric relation. Anterior guidance serves as an anterior control for posterior disclusion. Anterior guidance protects the back teeth from lateral and protrusive forces (4). When replacing posterior teeth, achieving posterior disclusion, deciding the plane of occlusion, and choosing the type of occlusal scheme are the three most important factors to be considered (2),(6). The contraindications of Hobo twin stage procedures include abnormal curve of Wilson, curve of Spee, tilted and abnormally rotated teeth (3),(7).
Full mouth rehabilitation aims to restore the stomatognathic system’s function, aesthetics and biological harmony. A unique feature of Hobo twin stage technique is that it reproduces disocclusion with accuracy and does not require condylar path measurement. Disocclusion can be reproduced precisely as programmed. It ensures optimised occlusion with a predictable posterior disclusion. It is a relatively simple technique that does not require any special equipment and gives predictable results in minimum appointments.
DOI: 10.7860/JCDR/2021/52374.15743
Date of Submission: Sep 13, 2021
Date of Peer Review: Oct 16, 2021
Date of Acceptance: Nov 08, 2021
Date of Publishing: Dec 01, 2021
AUTHOR DECLARATION:
• Financial or Other Competing Interests: None
• Was informed consent obtained from the subjects involved in the study? Yes
• For any images presented appropriate consent has been obtained from the subjects. Yes
PLAGIARISM CHECKING METHODS:
• Plagiarism X-checker: Sep 14, 2021
• Manual Googling: Nov 03, 2021
• iThenticate Software: Nov 19, 2021 (10%)
ETYMOLOGY: Author Origin
- Emerging Sources Citation Index (Web of Science, thomsonreuters)
- Index Copernicus ICV 2017: 134.54
- Academic Search Complete Database
- Directory of Open Access Journals (DOAJ)
- Embase
- EBSCOhost
- Google Scholar
- HINARI Access to Research in Health Programme
- Indian Science Abstracts (ISA)
- Journal seek Database
- Popline (reproductive health literature)
- www.omnimedicalsearch.com